For best results, set the paper type and paper size before copying or printing. For information on changing paper settings, see the onscreen HP Image Zone Help.
Tip To help prevent rips, wrinkles, and curled or bent edges, store all paper flat in a resealable bag. If the paper is not stored properly, extreme changes in temperature and humidity might result in curled paper that does not work well in the HP
To load 10 x 15 cm (4 x 6 inch) photo paper
1.Remove all paper from the paper tray.
2.Insert the stack of photo paper into the far right side of the paper tray with the short edge forward and the glossy side down. Slide the stack of photo paper forward until it stops.
If the photo paper you are using has perforated tabs, load the photo paper so that the tabs are closest to you.
3.Squeeze and hold the tab on the top of the
Do not overload the paper tray; make sure the stack of photo paper fits within the paper tray and is no higher than the top of the
Load postcards or Hagaki cards
You can load postcards or Hagaki cards into the paper tray of your HP
For the best results, set the paper type and size before printing or copying. For more information, see the onscreen HP Image Zone Help.
To load postcards or Hagaki cards
1.Remove all paper from the paper tray.
2.Insert the stack of cards into the far right side of the paper tray with the short edge forward and the print side down. Slide the stack of cards forward until it stops.
3.Squeeze and hold the tab on the top of the
Do not overload the paper tray; make sure the stack of cards fits within the paper tray and is no higher than the top of the
Load originals and load paper
User Guide | 17 |
