HP 1510xi, 1510v, 1513 manual Avoid paper jams, Paper, Tips

Paper

HP papers

Labels

(for printing from a software application only)

Tips

●HP Premium Paper: Locate the gray arrow on the nonprinting side of the paper, and then slide the paper into the paper tray with the arrow side facing up.

●HP Premium Inkjet Transparency Film: Insert the film so that the white transparency strip (with arrows and the HP logo) is on top and is going into the paper tray first. (For printing from a software application only.)

Note The HP All-in-One cannot automatically detect transparency film. For best results, set the paper type in the software application to transparency film before printing onto transparency film.

●HP Iron-On Transfers: Flatten the transfer sheet completely before using it; do not load curled sheets. (To prevent curling, keep transfer sheets sealed in the original package until you are ready to use them.) Locate the blue stripe on the nonprinting side of the transfer paper and then manually feed one sheet at a time into the paper tray with the blue stripe facing up. (For printing from a software application only.)

●HP Matte Greeting Cards, HP Photo Greeting Cards, or

HP Textured Greeting Cards: Insert a small stack of HP greeting card paper into the paper tray with the print side down; slide the stack of cards forward until it stops. (For printing from a software application only.)

Always use letter or A4 label sheets designed for use with HP inkjet devices, and make sure that the labels are no more than two years old. Labels on older sheets might peel off when the HP All-in-One, causing paper jams.

1.Fan the stack of labels to make sure none of the pages are sticking together.

2.Place a stack of label sheets on top of full-size plain paper in the paper tray, label side down. Do not insert labels one sheet at a time.

Avoid paper jams

To help avoid paper jams, follow these guidelines:

●Prevent curled or wrinkled paper by storing all unused paper flat in a resealable bag.

●Remove printed papers from the paper tray frequently.

●Ensure that paper loaded in the paper tray lays flat and the edges are not bent or torn.

●Do not combine different paper types and paper sizes in the paper tray; the entire stack of paper in the paper tray must be the same size and type.

●Adjust the paper-width guide in the paper tray to fit snugly against all paper. Make sure the paper guide does not bend the paper in the paper tray.

Load originals and load paper

User Guide 19