Plug the power cable into a grounded power outlet, surge protector, or power strip. If you are using a power strip, make sure the power strip is on.

Test the power outlet to make sure it is working. Plug in an appliance that you know works, and see if the appliance has power. If not, then there might be a problem with the power outlet.

If you plugged the HP All-in-One into a switched outlet, make sure the switch is on.

When you press the On button, wait a few seconds for the HP All-in-One to turn on.

My USB cable is not connected

Solution You must first install the software that came with your HP All-in-One before connecting the USB cable. During installation, do not plug in the USB cable until prompted by the onscreen instructions. Connecting the USB cable before prompted can cause errors.

Connecting your computer to your HP All-in-One with a USB cable is straightforward. Simply plug one end of the USB cable into the back of your computer and the other into the back of the HP All-in-One. You can connect to any USB port on the back of your computer.

Note 1 AppleTalk is not supported.

Note 2 Do not plug the USB cable into the USB port on your keyboard. Troubleshooting information

User Guide

53

Page 56
Image 56
HP 1513, 1510v, 1510xi manual My USB cable is not connected