Installing the auto-duplex unit

You can print on both sides of a sheet of paper automatically when the auto-duplex unit is installed on the printer. The auto-duplex unit comes with the HP Business Inkjet 2800dt and HP Business Inkjet 2800dtn printers. For information on using it, see Enabling accessories in the printer driver and Printing on both sides (duplexing).

To install an auto-duplex unit

1Push the buttons on both sides of the rear access panel and remove the panel from the printer.

2Slide the auto-duplex unit into the printer until the unit locks into place.

Note

Do not press the buttons on either side of the auto-duplex unit when installing; use them only

 

for removing the unit from the printer.

 

 

3Enable the auto-duplex unit in the printer driver. See Enabling accessories in the printer driver.

12 2 - Installing accessories

ENWW