HP 2800 To open the EWS, EWS pages, Note, Pages, Contents, Launch EWS, Web browser, Information, Toolbox (Windows), HP Web Jetadmin software

To open the EWS

You can open the EWS in the following ways:

Note		To open the EWS from the Toolbox (Windows) or the HP Inkjet Toolbox (Mac OS), the printer
		must be on a network and must have an IP address.
	z	Web browser
		In a supported Web browser on your computer, type the IP address that has been
		assigned to the printer. For example, if the IP address is 123.123.123.123, type the
		following address into the Web browser:
		http://123.123.123.123.
		The IP address for the printer is listed on the configuration page; see Understanding and
		printing the configuration page.
		After you open the EWS, you can bookmark it so that you can return to it quickly in
		the future.
	z	Toolbox (Windows)
		1 Open the Toolbox. For instructions, see Toolbox (Windows).
		2 Click the Information tab, and then click Launch EWS.

EWS pages

The EWS contains pages that you can use to view product information and change printer settings. The pages also contain links to other e-services.

Pages	Contents
Information	Shows status information about the printer, its ink supplies and usage, and a log of
	printer events (such as errors).
Settings	Shows the settings that have been configured for the printer and gives you the ability
	to change these settings.
Networking	Shows network status and the network settings that have been configured for the
	printer. These pages only appear if the printer is connected to a network. See
	Configure network options for more information. See also the HP Jetdirect
	Administrator’s Guide on the Starter CD for more information.
Other Links	Connects you to other resources, including e-services, such as HP Instant Support,
	myPrintMileage, and online ordering of supplies. For more information, see HP Instant
	Support and myPrintMileage.
	You can also add or customize up to five links to the websites of your choice.
	These links appear on the left pane throughout the EWS pages.

HP Web Jetadmin software

The HP Web Jetadmin software is a Web-based management solution for remotely installing, configuring (both individually or in batch mode), monitoring status (including levels for supplies), conducting remote diagnostics, and troubleshooting a wide variety of HP and non-HP network peripherals.

After the HP Web Jetadmin software has been installed, you can gain access to it from anywhere within your intranet by using a standard Web browser.

To get more information or to download the software, go to http://www.hp.com/go/ webjetadmin.

34 4 - Configuring and managing the printer ENWW