Message

Value or Submenu

Description

 

 

 

CFG IPX/SPX

NO

Selects whether to use the IPX/SPX menu and set

 

YES

the IPX/SPX protocol parameters.

 

 

 

 

 

In the IPX/SPX menu, you can specify the frame

 

 

type parameter used on your network.

 

 

z The default is AUTO, which automatically sets

 

 

 

and limits the frame type to the first one

 

 

 

detected.

 

 

z For Ethernet networks, frame type selections

 

 

 

include EN_8023, EN_II, EN_8022, and EN_SNAP.

 

 

z For Token Ring networks, frame type selections

 

 

 

include TR_8022 and TR_SNAP.

 

 

In the submenu for Token Ring cards, you can also

 

 

specify the NetWare Source Routing parameter,

 

 

which can be AUTO (default), OFF, SINGLE R,

 

 

or ALL RT.

 

 

 

WEB

HTTPS

For configuration management, specify whether the

 

HTTP/HTTPS

embedded Web server will accept communications

 

 

using HTTPS (Secure HTTP) only, or both HTTP

 

 

and HTTPS.

 

 

z HTTPS: For secure, encrypted communications,

 

 

 

only HTTPS access is accepted. The print

 

 

 

server will appear as a secure site.

 

 

z HTTP/HTTPS: Access using either HTTP or

 

 

 

HTTPS is permitted.

 

 

 

SECURITY

KEEP

Specify whether the current security settings on the

 

RESET

print server will be saved or reset to factory defaults.

 

 

z KEEP (default): The current security settings are

 

 

 

maintained.

 

 

z RESET: Security settings are reset to factory

 

 

 

defaults.

 

 

 

CFG LINK

NO

Selects whether you want to manually configure the

 

YES

HP Jetdirect 10/100Base-TX print server’s network

 

 

link speed and communication mode.

 

 

 

 

 

The HP Jetdirect settings must match the network.

 

 

The default setting is NO, which bypasses the link

 

 

configuration menu items.

 

 

If you specify YES, you can select one of the

 

 

following link configuration menu items:

 

 

z AUTO (default): The print server automatically

 

 

 

configures itself to match the link speed and

 

 

 

communication mode of the network. If it fails,

 

 

 

100TX HALF will be set.

 

 

z

10T HALF: 10 Mbps, half-duplex operation

 

 

z

10T FULL: 10 Mbps, full-duplex operation

 

 

z

100TX HALF: 100 Mbps, half-duplex operation

 

 

z

100TX FULL: 100 Mbps, full-duplex operation

 

 

 

 

ENWW

Changing networking parameters from the control panel 57