Loading media

To load tray 1 or tray 2

1If you are loading tray 1, raise the output tray and pull tray 1 out of the printer by grasping under the front of the tray 1.

If you are loading tray 2, pull out tray 2 and raise its cover.

2If you are loading A3 or larger sized media, extend the tray by pressing the tray extension lock near the front of the tray and pulling both ends of the tray in opposite directions until it is fully extended.

Tray 1

3Press the button of the media width guide and slide the guide to the left. Press the button of the media length guide and slide the guide towards you.

ENWW

Loading media 23