The HP Jetdirect print server automatically selects a NetWare frame type. Select a frame type manually only when the print server selects an incorrect frame type. To identify the frame type chosen by the HP Jetdirect print server, print a configuration page from the control panel.
See Understanding and printing the configuration page.
The following frame types are supported:
zEthernet_802.3
zEthernet_II
zEthernet_802.2
zEthernet_SNAP
Disabling network protocols (optional)
By factory default, all supported network protocols are enabled. Disabling unused protocols has the following benefits:
zIt decreases
zIt prevents unauthorized users from printing to the printer.
zIt provides only pertinent information on the Configuration page.
zIt allows the control panel to display
Note | Do not disable the IPX/SPX protocol if Windows 98, Windows NT, Windows Me, | ||||
|
| Windows 2000, or Windows XP users will be printing to the printer. |
| ||
|
|
|
|
| |
1 | Press | (Select button) on the control panel to enter the menus. |
| ||
2 | Press | (Down Arrow button) to highlight CONFIGURE DEVICE, and then | |||
|
| press | (select button). |
| |
3 | Press | (Down Arrow button) to highlight I/O, and then press | (Select button). | ||
4 | Press | (Down Arrow button) to highlight EIO SUBMENU, and then |
| ||
|
| press | (Select button). |
| |
5 | Press | (Down arrow button) to highlight the network protocol you want to disable, | |||
|
| and then press | (Select button). |
| |
6 | Press | (Down Arrow button) to highlight OFF, and then press | (Select button). | ||
7 | Press | (Cancel button) to return to the READY state. |
| ||
58 5 - Control panel | ENWW |