use the fax features

Speed Dial Setup

1:Speed Dial

2:Delete Speed Dial

3:Print Speed Dial List

The first unassigned speed-dial entry appears on the display.

3Press OK to select the displayed speed-dial entry.

4Enter the fax number to assign to that entry, and then press OK. The fax number can be up to 50 digits in length.

Tip: To enter a three-second pause within a number sequence, press Redial/Pause to display a dash.

5Enter the person’s or company’s name, and then press OK. The name is limited to 13 characters in length.

For more information on entering text, see enter text on page 42.

6After Enter Another? appears, press 1 (Yes), if you want to set up another number, or press 2 (No) to exit.

delete speed-dial settings

Follow these steps to delete an individual speed-dial entry.

1Press Setup.

2Press 2, then press 2 again.

This selects Speed Dial Setup and then selects Delete Speed Dial.

3Press until the individual entry that you want to delete appears, and then press OK.

control resolution and contrast

You can change the resolution and contrast of documents that you are sending. Your changes revert to the default values after two minutes of inactivity, unless you set them as the default. For information, see set new defaults on page 47.

Note: These settings do not affect copy settings. Copy resolution and copy contrast are set independently from fax resolution and fax contrast. Also, the settings that you change from the front panel do not affect faxes sent from your computer.

This section contains the following topics:

• change resolution

• change contrast

change resolution

Resolution affects the transmission speed and quality of faxed documents. The

 

HP Officejet only sends faxes at the highest resolution supported by the

fax

receiving fax machine.

 

reference guide

45