load originals and load paper
set the paper type
The following procedure describes how to set the paper type for the Copy option on your HP Officejet. Select the Paper Type setting that matches the paper or transparency film you are using.
Note: When printing from your computer, set the
1Press the Copy button until Paper Type appears.
2Press 
until the appropriate paper type appears.
3Press OK to choose the displayed paper type.
Note: This setting returns to its default setting two minutes after the job has been completed. For information on changing the default copy setting, see change default copy settings on page 20.
set the paper size
The following procedure describes how to set the paper size for the Copy and Fax options on your HP Officejet. Select the Paper Size setting that matches the paper or transparency film you are using. The HP Officejet uses letter, legal, A4, or 4 by 6 inch (10 by 15 cm) paper.
This section contains the following topics:
•set the copy paper size on page 17
•set the paper size for receiving a fax on page 17
Note: This setting returns to its default setting two minutes after the job has been completed. For information on changing the default copy setting, see change default copy settings on page 20.
set the copy paper size
1Press the Copy button until Copy Paper Size appears.
2Press 
until the appropriate paper size appears.
3Press OK to choose the displayed paper size.
set the paper size for receiving a fax
You can select the paper size for received faxes. The paper size selected should match what is loaded in your input tray. Faxes can be printed on letter, A4, or legal paper only.
Note: If an incorrect paper size is loaded in the input tray when a fax is received, the fax will not print. Load letter, A4, or legal paper, and then press OK to print the fax.
1Press Setup.
2Press 3, then press 5.
This selects Basic Fax Setup and then Fax Paper Size.
3Press 
to highlight an option, and then press OK.
paper & originals load
reference guide | 17 |