12.Rotate the bottom of the board upward (3), and then remove the board from the computer. Figure 6-31Removing the sidekey board

13.If you need to remove the cable:

a.Remove the stand bracket by removing the four black Torx screws that secure it to the computer (1), and then lifting the bracket from the computer (2).

Figure 6-32Removing the stand bracket

b.Disconnect the cable from the PB/LED connector on the system board. The following image shows the cable highlighted by arrows.

52 Chapter 6 Removal and Replacement Procedures All-in One (AIO) Chassis

Page 60
Image 60
HP 8200 SM774UP manual