
To remove the display panel:
1.Prepare the computer for disassembly (see Preparing to Disassemble the Computer on page 29).
2.Remove the center access panel (see Center Access Panel on page 32).
3.Remove the memory access panel (see Memory Access Panel on page 34).
4.Remove the memory module (see Memory on page 42).
5.Remove the drive access panel (see Drive Access Panel on page 35).
6.Remove the stand (see Stand on page 33).
7.Remove the optical drive (see Optical Drive on page 37).
8.Remove the top panel (see Top Panel on page 45).
9.Remove the rear cover (see Rear Cover on page 48).
10.Remove the system board cover (see System Board Cover on page 49).
11.Remove the power switch assembly cable. You do not have to remove the remaining cables.
12.Remove the front bezel (see Front Bezel on page 75).
13.Disconnect the display cable (1) and the backlight cable (2) from the display panel. Figure
14.Remove the four silver Torx screws that secure the display panel to the frame or brackets. The LG panel mounts to a large frame using four screws - two on top, two on the bottom.
The Samsung panel mounts to two small brackets, one on each side. Each bracket is secured by two screws.
Display Panel 77