Stand

The stand is secured with three Torx screws. You must remove the center access panel to remove the stand.

To remove the stand:

1.Prepare the computer for disassembly (see Preparing to Disassemble the Computer on page 29).

2.Remove the center access panel (see Center Access Panel on page 32).

3.Remove the three silver Torx screws (1) that secure the stand to the computer.

4.Rotate the stand upward (2), and then lift the stand off the computer (3). Figure 6-5Removing the stand

To replace the stand, reverse the removal procedures.

Stand 33

Page 41
Image 41
HP 8200 SM774UP manual Stand