5.Grasp the handle on top of the hard drive cage (1) and slide the cage toward the outer edge of the computer, then lift the cage out of the computer (2).

Figure 6-15Removing the hard drive cage

6.Remove the four mounting screws that secure the drive to the cage. Do not remove the blue rubber grommets behind each screw. They must stay attached to the cage when installing a new hard drive.

NOTE: Inspect the four blue rubber grommets in case some of them are damaged or lost. Grommet spare parts are available.

Figure 6-16Removing the hard drive mounting screws

40 Chapter 6 Removal and Replacement Procedures All-in One (AIO) Chassis

Page 48
Image 48
HP 8200 SM774UP manual