17.Lift the main system bracket assembly off the front bezel (3).

The display panel sits between the main bracket assembly and the front bezel. Figure 6-55Removing the main bracket assembly from the front bezel

18.Lift the display panel from the front bezel by pressing the four tabs (two on each side) to release the panel from the bezel, and then lifting the panel off the bezel.

Figure 6-56Removing the display panel from the front bezel

To install the front bezel, reverse the removal procedures.

Display Panel

Two different display panels are available, LG and Samsung.

To ensure compatibility, when replacing the display panel, remove the backlight cable with the old panel and replace with the new cable supplied in the replacement kit.

The display panel is secured to the display bracket with four Torx screws, as follows:

LG - two screws on top, two screws on the bottom

Samsung - two screws on each side

76 Chapter 6 Removal and Replacement Procedures All-in One (AIO) Chassis

Page 84
Image 84
HP 8200 SM774UP manual Display Panel