Webcam Module

The webcam module is located at the top of the computer beneath the top panel. It is secured with two silver Phillips screws and has one connector.

Figure 6-24Webcam module location

To remove the webcam module:

1.Prepare the computer for disassembly (see Preparing to Disassemble the Computer on page 29).

2.Remove the center access panel (see Center Access Panel on page 32).

3.Remove the memory access panel (see Memory Access Panel on page 34).

4.Remove the drive access panel (see Drive Access Panel on page 35).

5.Remove the top panel (see Top Panel on page 45).

6.Remove the two silver Phillips screws (1) that secure the webcam module to the computer.

7.Lift the webcam module as much as the cable allows, and then disconnect the cable from the module (2).

46 Chapter 6 Removal and Replacement Procedures All-in One (AIO) Chassis

Page 54
Image 54
HP 8200 SM774UP manual Webcam Module