
Converter Board
The converter board is located on the left side of the computer. It is secured with two Torx screws and has two connectors.
Figure 6-35 Converter board location
To remove the converter board:
1.Prepare the computer for disassembly (see Preparing to Disassemble the Computer on page 29).
2.Remove the center access panel (see Center Access Panel on page 32).
3.Remove the memory access panel (see Memory Access Panel on page 34).
4.Remove the drive access panel (see Drive Access Panel on page 35).
5.Remove the stand (see Stand on page 33).
6.Remove the optical drive (see Optical Drive on page 37).
7.Remove the top panel (see Top Panel on page 45).
8.Remove the rear cover (see Rear Cover on page 48).
9.Disconnect the two cables from the board (1).
NOTE: Be careful not to damage the cables when disconnecting them from the board. Do not pull on the wires.