Display Cable
The main display cable is located just above the system board. The heat sink covers the connector on the display panel.
Figure 6-47 Display cable location
To remove the display cable:
1.Prepare the computer for disassembly (see Preparing to Disassemble the Computer on page 29).
2.Remove the center access panel (see Center Access Panel on page 32).
3.Remove the memory access panel (see Memory Access Panel on page 34).
4.Remove the drive access panel (see Drive Access Panel on page 35).
5.Remove the stand (see Stand on page 33).
6.Remove the optical drive (see Optical Drive on page 37).
7.Remove the top panel (see Top Panel on page 45).
8.Remove the rear cover (see Rear Cover on page 48).
9.Remove the system board cover (see System Board Cover on page 49).
10.Remove the heat sink (see Heat Sink (Thermal Module) on page 59.
11.Disconnect the cable from the LVDS1 connector on the system board (1).
Display Cable 65