HP 9200c manual Connect the power cord

Step 6. Connect the power cord

	1. Connect the power cord to the product power cord connector. Then connect the power
	cord to an adequate alternating current (ac) outlet.
	This product can operate using either 110/120 volts (V), 60 hertz (Hz) power or 220/240 V,
NOTE
	50 Hz power.

2.Turn the product on by using the power button. After the product warms up, a prompt appears asking you to configure your control-panel display language (see Step 7. Configure the control-panel settings).

14 Chapter 2 Setup ENWW