Step 8. Assign the IP address
In order to function properly, the device must be assigned a valid IP address on your network. If your network uses dynamic host configuration protocol (DHCP), this IP address can be assigned automatically. DHCP is the default setting in the digital sender. If you are not using DHCP, you will need to manually assign an IP address.
Finding the DHCP IP address
Use one of the methods below to find the IP address that DHCP has automatically assigned.
●Look at the
●If the IP address does not appear on the
Manually assigning an IP address
If you need to assign an IP address to the device, follow these instructions.
1.Press the MENU button on the control panel.
2.Touch CONFIGURE DEVICE.
3.Scroll down and touch I/O.
4.Scroll down and touch EMBEDDED JETDIRECT MENU.
5.Touch TCP/IP.
6.Touch CONFIG METHOD.
7.Touch MANUAL.
8.Touch MANUAL SETTINGS.
9.Touch IP ADDRESS and use the
16 Chapter 2 Setup | ENWW |
