HP 9200c manual Install and configure the software, Before you begin, To install the software

Step 9. Install and configure the software

	Install the software on the server that will be supporting the HP Digital Sending Software
	(HP DSS) service. After installation, the HP DSS runs in the background as a service. It
	starts automatically whenever the server is restarted.
	The digital sender must be on and connected to the network in order to successfully
NOTE
	complete the software installation process.

Before you begin

During the software installation procedure, you are prompted to configure the digital-send options. In order to complete this configuration, you need the following information:

	● The software license key from the label on the software CD-ROM
	● The host name or IP address of the SMTP e-mail server that will be used to send e-mail
	from the digital sender
	It is highly recommended that the SMTP gateway be located on your own local area
NOTE
	network. However, you may also configure your product for e-mail functionality even if your
	mail services are provided by an outside Internet service provider (ISP) over a digital
	subscription line (DSL).
	● The host name or IP address of the LDAP server that will be used to retrieve e-mail
	addresses (optional)
	● The paths for any folders that are to be set up for the send-to-folder feature
	● The host name or IP address of the digital sender
	The installation steps that are provided here are for basic installation only. For more details,
NOTE
	and more advanced configuration information, see the HP 9200C Digital Sender Support
	Guide.

To install the software

	1.	Insert the HP DSS CD-ROM into the CD-ROM drive. When the setup program starts,
		select Install Now on the initial screen.
	The setup program should start automatically. If it does not, browse to the CD-ROM drive
NOTE
	and run the SETUP.EXE file.
	2.	In the Choose Setup Language dialog box, select a language for the installation. The
		setup wizard starts.
	3.	On the installation Welcome screen, click Next.
	4.	Accept the HP software license terms by clicking Yes.
	5.	Accept the default install location, or click Browse to select a different one.

English

ENWW Step 9. Install and configure the software 17