HP BOOK XE3 manual Removing the Display Reassembly Notes

Screws (flanged)

M2.5x8 mm (4)

Screws,

M2.5x4 mm

Figure 2-12. Removing the Display

Reassembly Notes

∙While installing the hinge screws, support the display so that it remains approximately flat.

∙Before installing the switchboard PCA, make sure the large display cable lies within the notch in the hinge saddle.

∙When in stalling a new display assembly, follow the procedure given in “Installing a New Display Assembly” on the following page.

2-18 Removal and Replacement HP OmniBook XE3