HP BP20N manual Printing on Card Stock or Custom-sized Materials

Printing on Card Stock or

Custom-sized Materials

Postcards, 3.5 by 5.83 in. (index) cards and other custom-sized materials can be printed with your printer. The minimum size is 76 by 127 mm (3 by 5 in.) and the maximum size is 216 by 356 mm (8.5 by 14 in.).

Guidelines

•Always insert the short-edge into the Multi-Purpose Tray first. If you want to print in landscape mode, make this selection through your software. Inserting paper long-edge first may cause a paper jam.

•Do not load more than 5 cards into the Multi-Purpose Tray at a time.

•Do not print on media smaller than 76 mm (3 in.) wide or 127 mm(5 in.) long.

•Set margins at least 6.4 mm (0.25 in.) away from the edges of the material in the software application

1Open the Multi-Purpose Tray and the rear output tray.

2Load print material with print side up and short edge first.

3

USING PRINT MATERIALS 3.21