![](/images/new-backgrounds/1319657/31965717x1.webp)
CAUTION:
•Protect the machine from dampness or wet weather, such as rain and snow.
•Unplug the power cord from the wall outlet before you move the machine. While moving the machine, you should take care that the power cord will not be damaged under the machine.
•When you disconnect the power plug from the wall outlet, always pull the plug (not the cable).
•Do not allow paper clips, staples, or other small metallic objects to fall inside the machine.
•Keep toner (used or unused) and toner bottle out of the reach of children.
•Be careful not to cut yourself on any sharp edges when you reach inside the product to remove misfed sheets of paper or masters.
•For environmental reasons, do not dispose of the machine or expended supply waste at household waste collection points. Disposal can take place at an authorized dealer.
•The inside of the machine could be very hot. Do not touch the parts with a label
indicating the “ ”. Otherwise, an injury might occur.
Power Supply
The
Ozone Safety
This product generates ozone during operation.
Normally, the ozone level is safe for operators. If ozone odor may appear, ventilate the room.
Laser Safety:
This equipment is considered a class 1 laser device. This equipment contains a 5 milliwatt,
nanometer wavelength, AlGaAs laser diode. The following marking is attached on the back of the equipment.
Caution:
Use of controls or adjustment or performance of procedures other than those specified in this User's Guide might result in hazardous radiation exposure.
For North America
Laser Safety:
This equipment complies with requirements of 21 CFR subchapter J for class 1 laser products. This equipment contains a 5 milliwatt,
Caution:
Use of controls or adjustment or performance of procedures other than those specified in this User's Guide might result in hazardous radiation exposure.
viii