HP 7500A E910 C9309A#B1H manual Solve copy problems, No copy came out

Models: C9309A 7500A E910 C9309A#B1H

1 252
Download 252 pages 48.96 Kb
Page 133
Image 133

Multiple pages are being picked up

Fan the media before loading.

Make sure the paper guides are set to the correct markings in the tray for the media size you are loading. Also make sure the guides are snug, but not tight, against the stack.

Make sure the tray is not overloaded with paper.

When using thin special media, make sure that the tray is completely loaded. If you are using special media that is only available in small quantities, try placing the special media on top of other paper of the same size to help fill the tray. (Some media is picked up more easily if the tray is full.)

If you are using thick special media (such as brochure paper), load media so that the tray is between 1/4 and 3/4 full. If necessary, place the media on top of other paper of the same size so that the stack height is within this range.

Use HP media for optimum performance and efficiency.

Solve copy problems

If the following topics do not help, see HP support for information about HP support.

No copy came out

Copies are blank

Documents are missing or faded

Size is reduced

Copy quality is poor

Copy defects are apparent

The printer prints half a page, then ejects the paper

Paper mismatch

Copy A3/11x17 animation did not display

No copy came out

Check the power

Make sure that the power cord is securely connected, and the printer turned on.

Check the status of the printer

The printer might be busy with another job. Check the control-panel display for information about the status of jobs. Wait for any job that is processing to finish.

The printer might be jammed. Check for jams. See Clear paper jams.

Check the trays

Make sure that media is loaded. See Load media for more information.

Solve copy problems

129

Page 133
Image 133
HP 7500A E910 C9309A#B1H manual Solve copy problems, No copy came out