HP C9309A manual Load an original on the scanner glass, To load an original on the scanner glass

Chapter 1

•When loading the trays and ADF, make sure the media is loaded correctly. For more information, see Load media or Load an original in the automatic document feeder (ADF).

•Do not overload the tray or ADF. For more information, see Media specifications.

•To prevent jams, poor print quality, and other printing problems, avoid loading the following media in the trays or ADF:

◦Multipart forms

◦Media that is damaged, curled, or wrinkled

◦Media with cutouts or perforations

◦Media that is heavily textured, embossed, or does not accept ink well

◦Media that is too lightweight or stretches easily

◦Media that contains staples or clips

NOTE: To scan, copy, or fax documents that contain pages that do not conform to these guidelines, use the scanner glass. For more information, see Load an original on the scanner glass.

Load an original on the scanner glass

You can copy, scan, or fax up to Legal-size originals by loading them on the glass.

NOTE: Many of the special features do not work correctly if the glass and lid backing are not clean. For more information, see Maintain the printer.

To load an original on the scanner glass

Use these steps to load an original on the scanner glass.

1.Lift the scanner lid.

2.Load your original print-side down.

TIP: For more help on loading an original, refer to the engraved guides along the edge of the glass.

18 Get started