Removal and Replacement Procedures

3.Disconnect the 2 antenna cables 1 and 2 from the Mini PCI communications card.

4.Spread the retaining tabs 3 that secure the Mini PCI communications card to the socket. The board tilts up.

5.Pull the card away from the socket at a 45-degree angle 4.

Removing a Mini PCI Communications Card

Reverse the above procedure to install a Mini PCI communications card.

ÄCAUTION: When reattaching the cables to the board, place a finger behind the board to protect it from breakage.

ÄCAUTION: To prevent an unresponsive system and the display of a warning message, install only a Mini PCI device authorized for use in your notebook by the governmental agency that regulates wireless devices in your country. If you install a device and then receive a warning message, remove the device to restore notebook functionality. Then contact Customer Care.

5–14

Maintenance and Service Guide

Page 109
Image 109
HP NX9500 manual Removing a Mini PCI Communications Card