Removal and Replacement Procedures
1.Prepare the notebook for disassembly (Section 5.3) and remove the following components:
❏Optical drive (Section 5.7)
❏Keyboard (Section 5.8)
❏Keyboard cover (Section 5.9)
❏Display assembly (Section 5.10)
❏Top cover (Section 5.11)
2.Release the ZIF connector 1 to which the SD Card slot/infrared module cable is attached, and then disconnect the cable 2.
3.Disconnect the right 3 and left 4 speaker cables from the system board.
Disconnecting the SD Card Slot/Infrared Module and Speaker Cables from the System Board
Maintenance and Service Guide |
