HP NX9500 manual Reverse the above procedure to install the processor

Removal and Replacement Procedures

2.Slide the processor release lever to the right 1 until it disengages from the clip on the back of the processor socket.

3.Lift the lever 2 up and swing it to the back until it is in an upright position.

4.Lift the processor 3 straight up to remove it.

✎Note that the gold triangle 4 on the processor should be aligned in the rear right corner when you install the processor.

Removing the Processor

Reverse the above procedure to install the processor.

5–40 Maintenance and Service Guide