Reverse the above procedure to install the top cover

Removal and Replacement Procedures

7.Disconnect the LED board cable 1 from the system board and remove the cable from the clip in the top cover.

✎The LED board cable is included in the Miscellaneous Cable Kit, spare part number 344851-001. The LED board is included with the top cover.

8.Disconnect the display lid switch module cable 2 from the display lid switch module.

9.Lift the front edge of the top cover 3 until the TouchPad cable 4 is accessible.

10.Disconnect the TouchPad cable from the low insertion force (LIF) connector on the system board.

11.Remove the top cover 5.

Removing the Top Cover

Reverse the above procedure to install the top cover.

Maintenance and Service Guide

5–29