Figure 26 Storage Array capacity
If there is not enough space available in the selected storage pool, a message is displayed in the Warnings box.
•RAID Level: Select a RAID level for the new datastores. The wizard lists all RAID levels supported by the selected storage pool.
4.Click Next.
The Add Datastores – Specify New Names window opens. See Figure 27 (page 54). Figure 27 Add Datastores – Specify New Names window
5.Enter the following information:
•New Datastore Names: Enter the base name for the new datastores. The # symbol is required and represents the numeric sequence for the new datastore names. In the generated datastore names, the # symbol is replaced with a number.
•Where # is numeric and starts at: Enter the start value for the numeric sequence of datastore names. The default values are as follows:
Number of datastores to add | Default start value for numeric sequence |
1 | |
01 | |
001 |
The Generated Names box shows the names of the datastores that will be created.
54 Provisioning storage
