4.Enter the iLO Username, iLO Password, iLO IP address and iLO MAC address, and then click OK.
Using the Insight Control for vCenter Properties page
1.Select a host, and then click the HP Insight Software tab.
2.Click the Properties link in the upper right corner.
3.Enter the iLO IP address or Host name, and a User Name and Password.
NOTE: If global credentials have been supplied using the Insight Control for vCenter setup wizard, only the Host name needs to be entered.
Configuring the Storage Module for vCenter
After the Storage Module for vCenter is installed, wait for the initialization process to complete, and then use the Storage Administrator Portal to configure the storage arrays and management
Configuring the Storage Module for vCenter | 9 |
