Figure 35 Create Virtual Machines – Specify Names window
7.Enter the following information:
•VM Names: Enter the base name for the new VMs. The # symbol is required and represents the numeric sequence for the new names. In the generated VM names, the # symbol is replaced with a number.
The default values are as follows:
Number | Default start value for numeric sequence |
1 | |
01 | |
001 |
The Generated Names box shows the names of the VMs that will be created.
•Datastore Names: Enter the base name for the new datastores. The # symbol is required and represents the numeric sequence for the new names. In the generated datastore names, the # symbol is replaced with a number.
The Generated Names box shows the names of the datastores that will be created.
•Where # is numeric and starts at: For both the VM and datastore names, enter the start value for the numeric naming sequence. The default value is 1.
8.Click Next.
The Create Virtual Machines – Review and Validate window opens. See Figure 36 (page 62).
Creating a VM from a template 61
