•Array Port: Storage array's port identifier used for this path
◦P9000/XP: Port number
◦P6000 EVA: Port name configured in P6000 Command View
◦P4000: Not applicable
◦P2000/MSA2000: Port on the array controller used for this path
•Hostgroup
◦P9000/XP: Name of the host group containing the HBA WWN on the array port for this path
◦P6000 EVA: Name of the host object containing the host WWN for this path
◦P4000: Name configured for the host's IQN in the management console
◦P2000/MSA2000: Nickname of the host with the host WWN for this path
•Host Access
◦P9000/XP: Host access level assigned to the volume
NOTE: The P9000 or XP array does not allow host access to be specified on a
◦P6000 EVA: Host access level assigned to the presentation of the disk to the host (for example, READ/WRITE or
◦P4000: Host access level assigned to the presentation of the disk to the host (for example, READ/WRITE or
◦P2000/MSA2000: Access setting for volume mapping (for example, READ/WRITE or
•Array Port Speed
◦P9000/XP: Speed at which the port is connected to the SAN (Gb/s)
◦P6000 EVA: Speed at which the port is connected to the SAN (Gb/s)
◦P4000: Not applicable
◦P2000/MSA2000
–FC: Speed at which the port is connected to the SAN (Gb/s)
–iSCSI: Speed at which the network port is connected to the network (Gb/s)
–SAS: Speed at which the port is connected to the host or switch (Gb/s)
•Host Mode
◦P9000/XP: Host mode assigned to the host group
◦P6000 EVA: Host mode assigned to the P6000 EVA host object
◦P4000: Not applicable
◦P2000/MSA2000: Name of the host's profile
•Preferred Path
◦P9000/XP: Not applicable
◦P6000 EVA: Specifies whether the path uses a port on the controller that is configured as the preferred path for the vdisk (Yes, No, No preference)
◦P4000: Not applicable
◦P2000/MSA2000: Not applicable
