Chapter 10

(continued)

Switzerland (German)

www.hp.com/ch/de/faxconfig

United Kingdom

www.hp.com/uk/faxconfig

Finland

www.hp.fi/faxconfig

Denmark

www.hp.dk/faxconfig

Sweden

www.hp.se/faxconfig

Norway

www.hp.no/faxconfig

Netherlands

www.hp.nl/faxconfig

Belgium (Dutch)

www.hp.be/nl/faxconfig

Belgium (French)

www.hp.be/fr/faxconfig

Portugal

www.hp.pt/faxconfig

Spain

www.hp.es/faxconfig

France

www.hp.com/fr/faxconfig

Ireland

www.hp.com/ie/faxconfig

Italy

www.hp.com/it/faxconfig

 

 

Configure the device (Windows)

NOTE: Microsoft Internet Explorer 6.0 or higher must be installed on the computer system to run the installation program.

In addition, you must have administrator privileges to install a printer driver on Windows 2000, Windows XP, or Windows Vista.

When setting up the device, HP recommends that you connect it after you install the software. The installation program is designed to provide you with the easiest setup experience. However, if you have connected the cable first, see Connect the device before installing the software.

This section contains the following topics:

Direct connection

Network connection

Direct connection

You can connect the device directly to your computer using a USB cable.

NOTE: If you install the device software and connect the device to a computer running Windows, you can connect additional devices to the same computer with USB cables without reinstalling the device software.

When setting up the device, HP recommends that you connect the device only when prompted by the software. However, if you have connected the cable first, see Connect the device before installing the software.

154 Configure and manage

Page 158
Image 158
HP Sender Flow 8500 L2719ABGJ, Pro 8500 8500, Pro 8500 CB025A#B1H manual Configure the device Windows, Direct connection