Chapter 8
3.When you hear the dial tone, enter the number by using the keypad on the device control panel.
4.Follow any prompts that might occur.
TIP: If you are using a calling card to send a fax and you have your calling
card PIN stored as a speed dial, when prompted to enter your PIN, press Speed Dial to select the speed dial entry where you have your PIN stored.
Your fax is sent when the receiving fax machine answers.
Send a fax using the broadcast fax option (color display models only)
You can send a fax to multiple recipients without first setting up a group speed dial.
NOTE: The list of recipients you specify for this fax is not saved and only works for sending faxes in black. If you intend to send other faxes to the same recipient list, you should create a group speed dial list.
To broadcast a fax to multiple recipients from the control panel
1.Press FAX and select Broadcast Fax.
2.Enter a fax number by using the keypad, or use the arrow keys to access speed dials.
NOTE: You can add up to 20 individual fax numbers.
3.Press START FAX Black.
4.When prompted, load your originals print side up and top first in the center of the document feeder tray. For additional information, see Load media.
5.Press START FAX Black again.
Send a fax from memory
You can scan a
NOTE: You can only send a
To send a fax from memory
1.Load your originals. For additional information, see Load the originals.
2.Press FAX and then select Scan and Fax. The Enter Number prompt appears.
3.Enter the fax number by using the keypad, press Speed Dial to select a speed dial, or press Redial/Pause to redial the last number dialed.
4.Press START FAX Black.
The device scans the originals into memory and sends the fax when the receiving fax machine is available.
78 Fax