HP Pro 8500 8500, Pro 8500 CB025A#B1H, Sender Flow 8500 L2719ABGJ Receive a fax manually

To change the ECM setting from the device control panel

1.Press Setup.

2.Select Advanced Fax Setup and then select Error Correction Mode.

3.Press the right arrow, , to select On or Off.

4.Press OK.

Receive a fax

You can receive faxes automatically or manually. If you turn off the Auto Answer option, you must receive faxes manually. If you turn on the Auto Answer option (the default setting), the device automatically answers incoming calls and receives faxes after the number of rings that are specified by the Rings to Answer setting. (The default Rings to Answer setting is five rings.)

If you receive a legal-size fax and the device is not currently set to use legal-size paper, the device reduces the fax so that it fits on the paper that is loaded. If you have disabled the Automatic Reduction feature, the device prints the fax on two pages.

NOTE: If you are copying a document when a fax arrives, the fax is stored in the device memory until the copying finishes. This can reduce the number of fax pages stored in memory.

This section contains the following topics:

•Receive a fax manually

•Set up backup fax reception

•Reprint received faxes from memory

•Poll to receive a fax

•Forward faxes to another number

•Set the paper size for received faxes

•Set automatic reduction for incoming faxes

•Block junk fax numbers

•Receive faxes to your computer (Fax to PC and Fax to Mac)

Receive a fax manually

When you are on the phone, the person you are speaking with can send you a fax while you are still connected. This is referred to as manual faxing. Use the instructions in this section to receive a manual fax.

NOTE: You can pick up the handset to talk or listen for fax tones.

Receive a fax 83