![](/images/backgrounds/292448/hp-hp-digital-sender-flow-8500-l2719abgj-users-manual-545047263x1.png)
b. Use your fingers to grasp the tab at the center of the top of the control panel faceplate. Pull away from the device to remove.
4.Retain the
CAUTION: The replacement device might not come with a
NOTE: See the setup poster that came with the device for instructions on how to attach your
Remove the duplexer
Remove the duplexer before shipping the device.
▲Push the button on either side of the duplexer, and then remove the unit.
Remove the output tray
Remove the output tray before shipping the device.
▲Lift the output tray, and gently pull it out of the device.
Pack the deviceComplete the following steps after you have prepared the device for shipment.
Pack the device | 259 |