Chapter 3

To load Tray 2

1.Pull the tray out of the device by grasping under the front of the tray.

2.Insert the paper print-side down in the center of the tray. Make sure the stack of paper aligns with the line on the width guide, and does not exceed the line marking on the guide.

NOTE: Tray 2 can be loaded only with plain paper.

3.Slide the media guides in the tray to adjust them for the size that you have loaded.

42 Use the device

Page 46
Image 46
HP Pro 8500 CB025A#B1H, Pro 8500 8500, Sender Flow 8500 L2719ABGJ manual To load Tray