HP Pro 8500 8500, Pro 8500 CB025A#B1H manual Declaration of conformity, Declaration of Conformity

Appendix D

Declaration of conformity

DECLARATION OF CONFORMITY

according to ISO/IEC 17050-1 and EN 17050-1

Supplier’s Name:	Hewlett-Packard Company	DoC#: SNPRC-0703-01-A
Supplier’s Address:	60, Alexandra Terrace, # 07-01 The Comtech, Singapore 118502

declares, that the product

Product Name:	HP Officejet Pro 8500 All-in-One Series
Regulatory Model Number:1)	SNPRC-0703-01
Product Options:	C9101A / Automatic 2-Sided Printing Device
	CB802A / 250 - sheet Paper Tray

conforms to the following Product Specifications and Regulations:

SAFETY:	IEC 60950-1:2001 / EN60950-1:2001 + A11: 2004
	EN 60825-1 1994+A1:2002+A2: 2001
EMC:	CISPR 22:2005/ EN 55022: 2006 Class B
	EN 55024:1998 +A1:2001 + A2:2003
	EN 61000-3-2: 2000 + A2: 2005
	EN 61000-3-3:1995 +A1: 2001
	FCC CFR 47, Part 15 Class B / ICES-003, Issue 4 Class B
TELECOM:	TBR 21: 19983)
	FCC Rules and Regulations 47CFR Part 68
	TIA-968-A-1 +A-2 +A-3+A-4 Telecommunications – Telephone Terminal Equipment
	CS-03, Part I, Issue 9, Feb 2005

Supplementary Information:

1.This product is assigned a Regulatory Model Number which stays with the regulatory aspects of the design. The Regulatory Model Number is the main product identifier in the regulatory documentation and test reports, this number should not be confused with the marketing name or the product numbers.

2.This product complies with the requirements of the Low Voltage Directive 2006/95/EC, the EMC Directive 2004/108/EC & the R&TTE Directive 99/5/EC and carries the CE-marking accordingly. In addition, it complies with the WEEE Directive 2002/96/EC and RoHS Directive 2002/95/EC.

3.This product complies with TBR21:1998, except clause 4.7.1 (DC characteristic), which complies with ES 203 021-3, clause 4.7.1.

4.This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two Conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

5.The product was tested in a typical configuration.

Singapore	Wong Soo Min , Director Quality
April 2008	Imaging & Printing Manufacturing Operations

Local contact for regulatory topics only:

EMEA: Hewlett-Packard GmbH, HQ-TRE, Herrenberger Strasse 140, 71034 Boeblingen, Germany www.hp.com/go/certificates

USA : Hewlett-Packard, 3000 Hanover St., Palo Alto 94304, U.S.A. 650-857-1501

278 Regulatory information