HP SuperStack 3 Load Balancer Appliance Defining a Cache, Subnet, Non-redundant, Configuration

Defining a Cache Subnet 55

Defining a Cache	Before you can add a cache, you need to have defined at least one cache
Subnet	subnet.
	The cache subnet cannot be in the same subnet as the server.
Non-redundant	The following steps describe how to create a cache subnet if you are
Configuration	configured for non-redundant server load balancing.
	To create a cache subnet, complete the following steps:
1	Click Logical View on the Toolbar.
2	From the Navigation tree, select System > Setup > Cache Subnets.
3	Click Add. The first wizard page appears.
4	Click Next. The Cache Subnet - Configure Address page appears.
5	Enter 192.168.3.200 in the IP Address field.
6	Enter 255.255.255.0 in the Subnet Mask field.
7	Click Next. The Cache Subnet - Floating Address page appears.
8	Complete the entry in the Floating Address field. This is the floating
	default gateway IP address. For example, 192.168.3.150.
	Do not forget to change the default gateway on your caches to this IP
	address.
9	Click Next. The Cache Subnet page appears.
10	Click Finish. Your cache subnet has been added.