●
shows the status of the wireless connection: if the blue light is shining, the wireless connection is active.
●Press 
to return to the home screen.
●Press 
to view help about the current screen.
●Press 
to go to the previous item.
●Press 
to go to the next item.
●Press 
to go back to the previous screen.
●Press 
to cancel the current process.
The following items are displayed only on the home screen.
●At the top left of the home screen is a message telling you which paper source is active.
●Press 
to view Web Services status and display your printer’s email address.
●Press 
to view connectivity status information and to perform network configuration. If a network cable is connected, 
is displayed instead.
NOTE: It is not possible to use wireless and wired network connections simultaneously.
●Press 
to view ink information.
●Press 
to change printer settings.
●Press 
to load, unload, and change options for roll paper.
●Press 
to change options for the
●Press 
to load, unload, and change options for single sheets.
●Press 
to access HP Designjet ePrint & Share.
NOTE: The active paper source is indicated by a slightly larger icon, with a white tick in a green
circle: .
If the printer is left idle for some time, it goes into sleep mode and switches off the 
, then Printer preferences > Sleep. You can set a time between 5 and 240 minutes.
The printer wakes from sleep mode and switches on the
Information about specific uses of the front panel can be found throughout this guide.
8 | Chapter 1 Introduction | ENWW |