Connect a computer to the printer by network (Windows)

The following instructions apply if you intend to print from software applications using a printer driver. See Printing on page 42 for alternative ways of printing.

Before you begin, check your equipment:

The printer should be set up and on.

The Ethernet switch or router should be on and functioning correctly.

The printer and the computer should be connected to the network (see Connect the printer to your network on page 14). The printer can be connected by Ethernet or Wi-Fi.

Now you can proceed to install the printer software and connect to your printer.

Printer software installation

1.Make a note of the printer's IP address from the front panel (see Access the Embedded Web Server on page 26).

2.Insert the HP Start-up Kit DVD into your computer. If the DVD does not start automatically, run the setup.exe program in the root folder of the DVD.

3.Navigate to the Software Installation button and press it.

4.Press the Install Software button, and choose your printer from the list of networked printers that appears, identifying it by its IP address if necessary.

If your computer fails to find any printers on the network, the Printer Not Found window is displayed, which helps you to try to find your printer. If you have a firewall in operation; you may have to disable it temporarily in order to find the printer. You also have the options of searching for the printer by its hostname, IP address, or MAC address.

In some cases, when the printer is not in the same sub-net as the computer, specifying the printer's IP address may be the only successful option.

5.Follow the instructions on your screen to install the printer drivers and other HP software, such as the HP Utility, HP Designjet Preview, and connections to HP Designjet ePrint & Share.

HP Designjet ePrint & Share allows you to create a copy of your document any time you print, securely in the cloud, in your private online print history. This means that you can reprint your documents from anywhere. To use HP Designjet ePrint & Share, you must create a password- protected account to protect your documents.

If you have enabled Web Services on your printer, you can print to your printer by email. Just check the Web Services menu for the email address of your printer, then send the file you want to print to that email address as an attachment.

ENWW

Connect a computer to the printer by network (Windows)

15

Page 23
Image 23
HP T520 manual Connect a computer to the printer by network Windows, Printer software installation