Chapter 3 Using the Operator Panel

3

 

Press the

key to select an internal font, press the

 

or

key repeatedly until Internal appears.

 

 

 

 

 

 

 

 

 

>Font Select

>

 

 

 

Internal

 

 

 

 

To select an option font, press the ENTER key while

 

 

> Font

Select

> is displayed. Press the or

 

 

key repeatedly until the message display indicates

 

 

Option.This operation is possible only when option

 

 

fonts are installed in the printer.

4

 

Press the

key.

 

 

>> I000

The letter before the number indicates the type of font as follows:

 

 

Letter

Description

 

 

I

Internal fonts

 

 

S

Soft (down load) fonts

 

 

 

 

 

 

M

Fonts in an option memory card

 

 

 

 

 

 

H

Fonts in a RAM disk or hard disk

 

 

 

 

 

 

O

Fonts in an option ROM

 

 

 

 

 

Table 3-8

 

5

Press the ENTER key. A blinking question mark (?)

appears.

 

 

 

>>?I000

6

Press the

or

key repeatedly until the desired

font number appears. For font numbers of the inter-

 

nal fonts, see List of Fonts on page 6-1.

 

 

>Font Select >

 

 

 

Internal

 

7

 

key.When the desired font is displayed, press the ENTER

8

 

 

Press the MENU key. The message display returns to

 

Ready.

 

 

Changing Type for Courier/Letter Gothic

Courier or Letter Gothic font type can be selected as Regular or Dark. For example, to change the type of Courier, proceed as follows:

1

 

Press the MENU key.

 

 

2

 

pears.Press the

or

key repeatedly until Font > ap-

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Font

 

 

>

 

3

 

 

 

 

 

 

 

 

Press the

key.

 

 

 

4

 

key.Check that Internal is displayed and press the

 

 

 

 

 

 

 

 

 

 

>Font Select

>

 

 

 

 

Internal

 

 

 

5

 

Press the

or

key repeatedly until >Courier ap-

 

pears.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

>>Courier

 

 

 

 

 

 

Regular

 

 

 

6

 

Press the ENTER key. A blinking question mark (?)

 

appears.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

>>Courier

 

 

 

 

 

 

 

 

 

 

 

 

? Regular

 

 

 

7

 

 

 

 

 

Select Regular or Dark using the or key.

8

 

Press the ENTER key.

 

 

9

 

Press the MENU key and the message display re-

 

turns to Ready.

 

 

 

 

 

 

 

 

Changing the Font Size

You can change the size of the default font. If the default font is a fixed-pitch font such as Courier or Letter Gothic, the character pitch can be changed instead of the font size.

1

Press the MENU key.

2

pears.Press the or

key repeatedly until Font > ap-

 

 

 

 

 

 

 

 

Font

>

 

 

 

 

 

3-25