Chapter 3 Using the Operator Panel

3

 

Press the key repeatedly until Delete appears

 

for the number of copies.

 

 

 

 

 

 

 

 

 

 

>Agenda

 

4

 

Delete

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Press the ENTER key. The private job is deleted from

 

the hard disk.

 

 

Printing a code job

Install the KM-NET Job Manager software from the CD- ROM supplied with the printer. To do this, from the CD- ROM Main Menu, select Printer Utilities > Install KM-NET Job Manager.

1

Browse through Windows Start > Programs > KYO-

CERA MITA > KM-Net > Job Manager.

2

Enter the password for the software. Job Manager

will start.

3

Click the Add printer icon (below). Select the Local

or Network port.

 

NOTE

If you use the local parallel port to connect to the printer, make sure that the printer driver is set to print to a local port. To check this out, click the Details tab of the printer Properties, and note the Print to the following port setting.

Add printer icon

 

Figure 3-4

4

Follow the wizard until the Select printer dialog box

is reached. When the printer is found in the Printer

List, click (highlight) it, then Finish.

5

Double click Model Name on the list. The jobs cur-

rently stored in the printer are shown. To print the

job, right click Job name and then click Print on the drop down list that appears.

It is possible to select more than one job at a time by left clicking a job one by one while pressing the Ctrl key on the computer keyboard.

Figure 3-5

The job remains intact even after printing. To permanently delete the job in the hard disk, right click the job name on Job Manager, then click Delete on the drop down list that appears.

Printing a List of Code Jobs

If you select Permanent Job Storage on the printer driver, you can have a List of Code Job printed using the operator panel.

1

 

Press the MENU key.

2

 

pears.Press the

or

key repeatedly until e-MPS > ap-

 

 

 

 

 

 

 

 

 

 

 

 

 

e-MPS

 

>

 

3

 

 

 

 

 

 

Press the

key.

 

 

4

 

Press the

or

key repeatedly until >List of

 

Code JOB appears.

 

 

>List of

Code JOB

5 Press the ENTER key. A question mark (?) appears.

>List of

Code JOB ?

3-15