HP WP36/50 MENU, MENU, MENU, MENU, ENTER, ENTER, ENTER, ENTER, Auto Continue Setting, Setting the Auto Continue Recovery Time

Chapter 3 Using the Operator Panel

2	Press the or key repeatedly until Others > ap-	2	Press the or key repeatedly until Others > ap-
	pears.		pears.

	Others	>
3
	Press the	key.
4	Press the	or key repeatedly until > Buzzer ap-
	pears.
	>Buzzer
	On

3

4

Others		>
Press the	key.
Press the	or	key repeatedly until Auto

Continue > appears.

>Auto Continue >

Mode Off

5	Press the ENTER key. A blinking question mark (?)	5	Press the ENTER key. A blinking question mark (?)
	appears.		appears.

	>Buzzer
	? On
6
	Select On or Off using the or key.
7	Press the ENTER key.
8	Press the MENU key. The message display returns to
	Ready.

Auto Continue Setting

When Auto Continue is enabled, the printer will automatically print the next received data following a preset amount of time passes after any one of the following errors occurs:

Memory overflow Press GO

Print overrun Press GO

KPDL error Press GO

File not found Press GO

RAM disk error Press GO

MemoryCard err Press GO

Hard disk err Press GO

Duplex disabled Press GO

Add Staple Press GO

Chad box full Press GO

If one of the above errors is caused by someone on a network where the printer is being shared, for example, data sent from another person will be printed after a preset amount of time.

For setting the auto continue recovery time, see the next sec- tion.

1 Press the MENU key.

	>Auto Continue
	Mode
		? Off
6
	Select On or Off using the or key.
7	Press the ENTER key.
8	Press the MENU key. The message display returns to
	Ready.

Setting the Auto Continue Recovery Time

Follow the procedure given below to change the recovery time for Auto Continue.

1	Press the MENU key.
2	Press the	or key repeatedly until Others > ap-
	pears.
	Others		>
3
	Press the	key.
4	Press the	or	key repeatedly until Auto
	Continue Mode > appears.

>Auto Continue >

Mode On

5	Press the	key and display >>Auto Continue
	Timer.

3-52