Chapter 3 Using the Operator Panel

1

 

Press the MENU key.

2

 

Press

the

or

key repeatedly until Paper

 

Handling > appears.

 

 

 

 

 

 

 

 

 

Paper Handling >

 

3

 

 

 

 

 

 

Press the

key. >Stitch Adjust > appears.

 

 

 

 

 

 

 

 

 

 

>Stitch Adjust >

 

4

 

 

 

 

 

 

Press the

key. >>A4/Letter appears.

 

 

 

 

 

 

 

 

 

 

>>A4/Letter

 

 

 

 

 

 

 

 

000

 

5

 

Press the

or

key to select A4/Letter, B4 or

 

A3/Ledger.

 

 

 

 

6

 

 

 

 

 

 

When the desired paper size is displayed, press the ENTER

 

key. A blinking cursor (_) appears under the value.

 

 

 

 

 

 

 

 

 

 

>>A4/Letter

 

 

 

7

 

 

 

 

000

 

 

 

 

 

 

 

 

 

 

 

Press the

or

key to increase or decrease, respec-

 

tively, the value at the blinking cursor. Use the

 

 

 

 

and

keys to move the cursor right and left.

 

 

Definable value: -057to 057

8

 

When the desired value is displayed, press the

 

ENTER key.

 

 

 

 

9

 

 

 

 

 

 

Press the MENU key. The message display returns to

 

Ready.

 

 

 

 

 

 

 

 

 

 

 

 

Overriding A4 and Letter Size Difference

This selects whether to enable or disable the difference between A4 size and Letter size. Under the default setting of Off, the paper size of the paper source is matched to the paper size formatting the jobs. If these differ, a corresponding error message is displayed. When this is set to On, printing is performed even if the actual paper size differs from the paper size formatting the jobs.

1

Press the MENU key.

 

2

Press the

or

key repeatedly until Paper

Handling > appears.

 

 

 

Paper Handling >

3

 

Press the

key.

4

 

Press the

or key repeatedly until >Override

 

A4/LT appears.

 

 

 

 

 

 

 

 

 

>Override A4/LT

 

 

 

 

Off

 

 

5

 

Press the ENTER key. A blinking question mark (?)

 

appears.

 

 

 

 

 

 

 

 

 

 

 

 

>Override A4/LT

 

 

 

 

 

 

 

 

 

? Off

 

 

6

 

 

 

 

 

Select On or Off using the or key.

7

 

Press the ENTER key.

8

 

Press the MENU key. The message display returns to

 

Ready.

 

 

 

 

 

 

Customizing Paper Type

The following describes the procedure used to set a user-defined paper type for the printer. Eight custom user settings may be registered. After having been set, any of these may be called up when setting the paper type for a paper source.

The paper weight and duplex path can be set (see Setting the Paper Weight on page 3-47, and Setting the Duplex Path on page 3-47) after selecting the paper type to be customized as follows. For how to reset the customized settings, see Resetting the Type Adjust on page 3-47.

1

 

Press the MENU key.

 

 

 

 

 

2

 

Press the

or

key

repeatedly

until

Paper

 

Handling > appears.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Paper Handling >

 

 

 

 

3

 

 

 

 

 

 

 

 

 

Press the

key.

 

 

 

 

 

4

 

Press the

or

key

repeatedly

until

>Type

 

Adjust > appears.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

>Type Adjust

>

 

 

 

 

 

 

Custom 1

 

 

 

 

 

3-46