HP WP36/50 2.2.9 Operating an Option Hard Disk, MENU, MENU, MENU, MENU, MENU, MENU, ENTER, ENTER, ENTER, ENTER, ENTER, ENTER, Resolution, Reading Data

Chapter 3 Using the Operator Panel

5	Press the ENTER key. A blinking question mark (?)
	appears.
	>EcoPrint Mode
		Off
	?
6
	Select On or Off using the or key.
7	Press the ENTER key.
8	Press the MENU key. The message display returns to
	Ready.

Resolution

You can set the default print resolution in three ways: 300 dpi, 600 dpi and Fast 1200 mode. The clarity of printed characters and graphics becomes sharper in this order. (The factory setting is Fast 1200 mode.)

1	Press the MENU key.
2	Press		the	or	key repeatedly until		Print
	Quality > appears.
	Print Quality				>
3
	Press the			key.
4	Press		the	or		key repeatedly	until
	>Resolution appears.
	>Resolution
		Fast 1200 mode
5	Press the ENTER key. A blinking question mark (?)
	appears.
	>Resolution
		Fast 1200 mode
	?
6
	Select Fast 1200 mode or 300 dpi, 600 dpi using the
		or	key.
7
	Press the ENTER key.
8	Press the MENU key. The message display returns to
	Ready.

Adjusting the Print Density

The print density can be adjusted in five steps: from 01 (light) to 05 (dark). The factory setting is 03.

1	Press the MENU key.
2	Press the		or	key	repeatedly	until	Print
	Quality > appears.
	Print Quality			>
3
	Press the		key.
4	Press the		or	key	repeatedly	until	>Print
	Density appears.
	>Print Density
	03
5	Press the ENTER key. A blinking question mark (?)
	appears.
	>Print Density
		03
	?
6
	Select the print density from five steps from 01
	(light) to 05 (dark) using the or key.
7
	Press the ENTER key.
8	Press the MENU key. The message display returns to
	Ready.

2.2.9 Operating an Option Hard Disk

By installing the option hard disk into the printer, the e-MPSfunction can be used. The printer’s menu selection system allows you to perform the following operations on the hard disk.

If the option hard disk is not formatted, the >Format menu will automatically appear on the message display.

•Reading data

•Writing data

•Deleting data

•Printing of list of partitions

Reading Data

Data stored on a hard disk can be read. To read data on a hard disk, proceed as follows.

1 Press the MENU key.

3-32