Chapter 5 Maintenance
10 | Remove the seal from the rear of the old waste toner |
box, and then close the opening of the box with the |
seal. Seal up the old waste toner box with the supplied plastic bag and dispose of it.
| Figure |
11 | Gently pull the cleaning knob as far as it will go, push |
and pull it several times, and then push it back in. |
Figure
12 Take out the new grid cleaner from the protective bag, and then remove the cap from the grid cleaner.
Figure
13 Pullout. the main charger approximately 5 cm (2 inches)
Figure
14 While avoiding the main charger roller (A) to be in contact with the grid cleaner pad, push and pull the main charger several times. (Do not push the main charger all the way in. Otherwise, water from the pad will cause the main charger unit to become we
and this may affect printing.)
(A)
Figure
When the grid is clean, remove the grid cleaner from the printer and dispose of it. The grid cleaner is not
15 Fit the new waste toner box to the printer.
Figure