Chapter 3 Using the Operator Panel
7 | Send data to be dumped to the printer. The message | |
Processing will be displayed while receiving the data. | ||
| ||
| Once the dumped data you require has been printed, | |
| it is possible to cancel the printing of any further | |
| dumped data by taking the printer offline by pressing | |
| the GO key and then pressing the CANCEL key. | |
8 | Once all data has been received, the message Waiting | |
will appear. Press the GO key to finish printing. | ||
|
The procedure described below resets the printer’s temporary conditions, such as the current unit of measurement, page orientation, font, character code set, margins, etc., set by commands to their default values.
1 |
| Press the MENU key. | |||
2 |
| Press the | or | key repeatedly until Others > ap- | |
| pears. |
|
|
| |
|
|
|
|
| |
|
|
|
|
|
|
|
| Others |
| > |
|
3 |
|
|
|
|
|
| Press the | key. |
|
| |
4 |
| Press the | or | key repeatedly until >Printer | |
| Reset appears. |
|
| ||
|
|
|
| ||
>Printer Reset
5 Press the ENTER key. A question mark (?) appears.
>Printer Reset ?
6 | Press | the ENTER key again. Self | test | appears | |
while | the printer is resetting itself, | then | Please | ||
|
wait followed by Ready.
Self test
Please wait
Ready
When you switch from the PCL 6 emulation to another, all downloaded fonts and macros are lost. Resource protection preserves these PCL resources in memory so that they are intact when you change the emulation back to PCL 6.
1 |
| Press the MENU key. | ||||
2 |
| Press the | or | key repeatedly until Others > ap- | ||
| pears. |
|
|
| ||
|
|
|
|
| ||
|
|
|
|
|
|
|
|
| Others |
| > |
| |
3 |
|
|
|
|
|
|
| Press the | key. |
|
| ||
4 |
| Press the | or | key repeatedly until >Resource | ||
| Prot. appears. |
|
| |||
|
|
|
| |||
|
|
|
| |||
|
| >Resource Prot. |
| |||
|
|
| Off |
|
|
|
5 |
| Press the ENTER key. A blinking question mark (?) | ||||
| appears. |
|
|
| ||
|
|
|
|
| ||
|
|
|
| |||
|
| >Resource Prot. |
| |||
|
|
|
|
|
|
|
|
| ? Off |
|
|
| |
6 |
|
|
|
|
| |
| Press the | or | key to display the desired mode. | |||
| The display changes as shown below. | |||||
|
| |||||
|
| Off (default) |
|
| ||
|
| Permanent |
|
|
| |
|
| Perm / Temp |
|
| ||
7 |
| When the desired mode is displayed, press the | ||||
| ENTER key. |
|
|
| ||
8 |
|
|
|
| ||
| Press the MENU key. The message display returns to | |||||
| Ready. |
|
|
| ||
|
|
|
|
| ||
In addition to the message displayed when the paper supply is exhausted, or when paper jamming occurs, an audio warning is made to sound. This is useful, for example, when the printer is in a location some distance from the user.
The audio alarm is set to On as a factory preset. If the alarm is set to Off, it will not sound.
1 Press the MENU key.